Skip to Content

All University of South Carolina system institutions will be closed through the end of the spring semester. Columbia campus virtual instruction will continue through the end of the Summer II semester (Aug 1). Details can be found on the coronavirus landing page.

College of Engineering and Computing

Nuclear Engineering

Our Research

Nuclear Engineering students can work with faculty in a number of laboratories performing research related to nuclear fuels and structural materials, thermal hydraulics, and advanced modeling and simulation. Nuclear power supplies more than half of South Carolina's energy, so the College of Engineering and Computing is dedicated to researching and improving this critical source energy.

The Nuclear Materials Laboratory is equipped and licensed for working with uranium and thorium based fuels with radiological hoods and inert atmosphere gloveboxes also used for working with pyrophoric materials. Metallographic and sample preparation tools are used for preparing materials for analysis in UofSC microscopy ad microanalysis instruments or for analysis at partner institutions. 

High temperature, controlled atmosphere furnaces are used for advanced fuel fabrication and testing. Induction heated furnaces are used to 3000 K and a longer duration tube furnace is used to temperatures up to 1900 K. A custom-built, fluidized-bed, chemical vapor deposition system is used for coating of fuel kernels including advanced TRISO fuels with ZrC.

Other instruments used for nuclear fuels characterization include particle size, porosimetry, density, and surface area analysis. Thermogravimetric and differential scanning calorimetry instruments are also employed in these studies at temperatures up to 2250 K.

High performance computing facilities are used to analyze and model nuclear reactors, advanced fuel cycles, and advanced nuclear fuels and materials. Modeling and simulation codes and tools are employed for neutronic, thermal hydraulic, computational fluid dynamics, thermochemical, safety and risk, shielding, and finite element analyses.

Thermal hydraulic test loops and laboratories are dedicated to studies of enhanced heat transfer, fluid flow, pressure drop and other phenomena associated with nuclear fuel rods and assemblies.

A stereo vision (3D) micro PIV (Particle Image Velocimetry) technique and micro-PLIF (Planar Laser Induced Fluorescence) are used to examine the impact of nanofluids on the development and performance of thermal and hydrodynamic boundary layers and to allow for a visual investigation of the flow field and the impact of shear-thinning.

Challenge the conventional. Create the exceptional. No Limits.