Skip to Content

College of Engineering and Computing


Our People

Graduate Student

suraj

Suraj Ravindran

Graduate Student,  Department of Mechanical Engineering,                                                     300 Main Street, A140 Columbia SC 29208 ,  Ph: (803) 446 4479 :Fax: (803) 777 0106, Email:muthiram@email.sc.edu 

tessema

Addis Tessema

Graduate Student,   Department of Mechanical Engineering,                                                    300 Main Street, A140 Columbia SC 29208 ,Ph: (240) 899 3441 :Fax: (803) 777 0106Email: atessema@email.sc.edu

ali

Ali F Fahem

Graduate Student,  Department of Mechanical Engineering,  300 Main Street, C007 Columbia SC 29208,   Ph: (803) xxx xxxx :Fax: (803) 777 0106,  Email: afahem@email.sc.edu

karan

Karan Kodagali

Graduate Student,  Department of Mechanical Engineering,                                                  300 Main Street, A140 Columbia SC 29208,  Ph: (803) 477 5144 :Fax: (803) 777 0106Email: kodagali@email.sc.edu

peter

Peter Malchow

Graduate Student,  Department of Mechanical Engineering,   300 Main Street, C007 Columbia SC 29208,   Ph: (803) XXX XXXX :Fax: (803) 777 0106,  Email: pmalchow@email.sc.edu

abig

Abigail Wohlford

Graduate Student,     Department of Mechanical Engineering, 300 Main Street, C007 Columbia SC 29208,    Ph: (803) XXX XXXX :Fax: (803) 777 0106,    Email:wohlfora@email.sc.edu   

 
Past Graduate Student

behrad

Dr. Behrad Koohbor

Ph.D, December 2016,   Postdoctoral Scholar,   University of Illinois at Urbana-champaign,   

gav

Guillermo A Valeri Paoli

MS,  May 2016,  Mechanical Engineering

mallon

Silas Mallon

MS, August 2014,  Mechanical Engineering

 

Past Undergrad Student

Nicholas Myers

  • Undergraduate Student, Department of Mechanical Engineering, 01/2016-present
    Experience
  • Fabrication of composite materials through hot press
    Composite testing under fatigue and monotonic loading
    Digital image correlation

Abigail Wohlford

  • Undergraduate Student, Department of Mechanical Engineering, 01/2016-present
  • Experience
    > Design and developing an experimental technique to measure the impact force generated by a dropping ball
    > Developing an intermediate strain rate compression/tension loading apparatus
    > Sintering high temperature materials
    > Sample preparation for SHPB testing of soft materials

Ronak Patel

  • Undergraduate Student, Department of Mechanical Engineering, 01/2015-present
  • Experience
    > Design, develop and fabricate load cell casing for high impact experiment \
    > Design and fabricate different loading fixtures
    > Prepare samples for SHPB test
  • Experimental Skills
    > Compression Split Hopkins pressure bar
    > Tensile and compression
    > Digital image correlation
    > Shock tube

Garrett Abernethy

  • Undergraduate Student
    Department of Mechanical Engineering
    01/2015-12/2015

Corbin Collier

  • Undergraduate Student
    Department of Mechanical Engineering
    01/2014-04/2014

Matthew Williamson

  • Undergraduate Student
    Department of Mechanical Engineering
    01/2014-08/2014

Gary Huneault

  • Undergraduate Student
    Department of Mechanical Engineering
    01/2012-05/2012

Silas Mallon

  • Undergraduate Student
    Department of Mechanical Engineering
    01/2012- 12/2012